Tag: heater

How to change your home air filter?

Posted on by info@techreach.io

Most of us want to make the most out of our heating system’s, especially during the cold winter months, there are a few tried and tested ways you can do this, like changing your air filter.

A clean filter could greatly improve the efficiency of your heating system while keeping your the air in your home pure and clean 

Here’s how you can do it:

1. Turn off your heating

To prevent your unit from turning on while you are changing the filter or any type of loose debris or filter fitting from ending up in the wrong duct or place.

For maximum safety, you could completely disconnect the system from power. 

2. Find your filter

To locate your filter there are two options:

The first and most sensible would be to check on the manual that came with the system, the manual will also tell you what kind and size filter you will need. 

If you can’t find the manual, you’ll see that most air filters are located in either the blower compartment (remove the furnace cover, typically by lifting up), or built into the metal ductwork before the blower fan.

3. Get the right filter

Filters can sometimes be hosed or rinsed off, while other heaters have one-use fiberglass filters, most can easily be found in hardware and improvement stores, where you can take the old filter and ask for the same one.  Also, you can always check your brand’s model online to be completely sure of what type of filter you will need. 

4. Remove the old filter

Remember according to your system you will either need to replace or wash it. Make note of the “airflow arrows” on the filter, so you can mimic the position when you install the clean filter. 

Extra tip: Filters come with MERV rating, which is a specific efficiency measure. Most would recommend a MERV rating between 7-12 for the best cost/allergen removal balance.

5. Insert clean filter

Following the direction arrows, you saw before, install the new filter with the same position as the old one. 

6. Turn on your heating

That’s it, you are done!

A clean filter will make the air in your home healthier, the heating more evenly distributed and protect your system from malfunctions. 

If you need help with your heating system, you can count on Maydone’s professional service 24/7. Let’s stay warm together!

Let’s stay warm together!

How to Reduce Your Carbon Footprint at Home

Posted on by info@techreach.io

Are you aware of the carbon footprint that comes from using your appliances at home? Here are some tips on how you can decrease your energy consumption in your household.

When we’re talking about climate change, we all have one question lined up: How can we contribute to saving the planet from a climate catastrophe?

As we all know, there are many ways of reducing our carbon footprint. For example, we can try to avoid traveling by plane and take the train as often as possible. Furthermore, we can eat less meat and try to buy regional and seasonal groceries. But how can we decrease our carbon footprint in the household?

As we are living in the 21st, we all have appliances at home that consume energy. As helpful as they are, these appliances leave a carbon footprint as well. But we have some tips for you on how you can decrease their energy usage easily.

1. Make Your Heater More Efficient

Did you know that the oil and gas industry is the biggest emitter in Canada when it comes to carbon emissions? Of course, you can blame big companies for that and ask them to adapt to more sustainable fuel options. But it might be easier to start at your home first as also small changes in your own household can make a change  We already have put together some tips for you on how you can make your heater more efficient.

If you are noticing that your heating system uses a lot of energy, you can always contact one of our technicians. You’ll find the contact details here.

2. Turn Your Appliances Off to Reduce Your Carbon Footprint

To reduce the carbon footprint of your appliances, you should make sure that all your appliances are completely turned off when they are not in use. This goes for TVs, stereos, and computers. It’s also important to unplug your appliances, such as mobile phones or laptops, once they are fully charged as they will otherwise waste energy.

Need help with the installation of a new washing machine? Our technicians are happy to help!

3. Switch to A Renewable Energy Provider

Around 17 % of Canada’s total primary energy supply comes from renewable energy sources. You can support green electricity and natural gas companies by switching the provider in your home. As this might be a bit pricier for your home than it was before, you could start by doing one thing at a time, for example by only purchasing green electricity at first.

4. Replace Old Appliances for a Lower Carbon Footprint

If you are a proud owner of a vintage washing machine, your time to say goodbye to your appliance might have come. Old appliances use a lot of energy and should, therefore, be replaced if you want to reduce your carbon footprint. A new washing machine can use 25 percent less energy up to 75 percent less water compared to your 20-year-old washing machine. Furthermore, by increasing appliance efficiency standards, you’ll not only save energy but also money on your utility bill.

5. Install Smart Home Technology

If your devices and appliances can connect to the internet, they are called smart technology. On the one hand, it can be convenient for you to have such things. On the other hand, they can help you with saving energy at home by monitoring the usage. Click here if you want to know more about it.  

5 Ways to Make Your Heater More Efficient

Posted on by info@techreach.io

A Heater is essential to keep apartments and houses warm during the colder months. With average temperatures between 36°F and 48°F in November, you’ll need this appliance to work well. Here are five tips on how to get the most out of your appliance!

 

There are different kinds of people out there. The ones that love winter and everything that comes with it, such as snow, Christmas or skiing. The others that just want the summer to return as quickly as possible. If you belong to the second group, your heater must be an essential appliance in your household – so at least the temperature in your home reminds you of brighter days.

 

But how often do you really think about your heater? Well, we don’t often notice them when they are working properly, we definitely start thinking about them as soon as the heater is broken. If you are experiencing something like that and you don’t know what to do about it, you can get in touch with our technicians, who are happy to help you. Click here to get in touch through online or call us: +1 (289) 801-7857 or +1 (888) 513 0052.

 

Anyhow, if your heater is working properly, you’re probably curios how you can use it without wasting energy. That’s why we have collected five tips for that will help keeping your apartment warm and cosy.

 

1.     Don’t Turn the Heater Thermostat Up to The Highest Temperature

 

When coming home to a cold apartment, it seems tempting to just turn up the thermostat to the highest level. You might think that will heat the apartment quicker. However, that is not true. The only thing that will go up quicker by doing that is your fuel bill.

 

2.     Adjust the Temperature of The Heater

 

Many people think that it makes sense to keep the temperature at a steady level throughout the day. But, if you want to save energy, it is recommended to adjust the temperature. For example: You could turn it down in the evening before you go to bed.

 

3.     Don’t Close the Vent

 

You would assume that you will use less energy when closing vents in unused rooms. Unfortunately, that is not true. As your heater will produce as much air as before, it is more effective to keep the vents open.

 

4.     The Heat Should be Able to Flow Freely

 

Most people know that they shouldn’t cover their heater to keep them working effectively. But even big furniture such as a sofa can stop the heat from flowing around freely. Consider rearranging some furniture to ensure a warm apartment and an efficient heating system.

 

5.     Lower the Temperature

 

The most effective way to save energy is to get used to a lower temperature at your home. If you are used to temperatures between 60°F and 70°F, you can save 2 % of your electricity costs with every degree you turn the temperature down. So, we consider that is worth putting on an extra sweater, right?